• All ResinDek panels have been certified to contain a minimum of 84% Pre-Consumer Recycled Content (dry weight basis)
• All ResinDek panels can contribute towards LEED® Certification Credits MR 4.1 & MR 4.2. Credits MR 5.1 & 5.2 are also available for projects within a 500 mile radius of Louisville, KY
• ResinDek panels are certified to be urea formaldehyde free and have been lab tested to less than 0.05 ppm.
• ResinDek panels can contribute towards LEED® Certification Credit EQ 4.4 in addition to MR 4.1 and 4.2.
• Credits MR 5.1 & 5.2 are also available for projects within a 500 mile radius of Louisville, KY
• Certificates of Achievement have been obtained from Scientific Certification Systems (SCS), an independent certification and standards development company for environmental and sustainability claims.

LEED® Certification Information

The U.S. Green Building Council (USGBC) has developed the construction industry's most widely accepted green building certification program. LEED® is a voluntary building certification program that defines high-performance green buildings, which are more environmentally responsible, healthier, and more profitable structures. LEED was created to establish a common standard of measurement for what constitutes a "green" building. LEED serves as a design guideline for green building and offers third party validation of a building's green features.

All ResinDek® panels can contribute towards LEED Credits MR 4.1, 4.2 and potentially 5.1 and 5.2, depending on the project's location.

In addition, ResinDek® panels can contribute towards LEED Credit EQ 4.4, as well as MR 4.1, 4.2 and potentially 5.1 and 5.2. All ResinDek panels may also help qualify for Innovation & Design Credits for exceeding standards - Please refer to our detailed table below for additional information.

ResinDek® can be used in conjunction with any of the LEED rating systems. However, the matrix included indicates how ResinDek panels contribute to compliance with the LEED NC v2.2 and the EB v2.0 rating systems.

ResinDek® LEED® NC v2.2 & EB v2.0 Credit & Point Information

LEED® Category	Requirements	Possible Points	ResinDek Solutions	Green Intent	New Const	Exist. Bldg.
Materials & Resources MR 4.1 4.2 & Exemplary Performance - Innovation in Design	Use materials with recycled content such that the sum constitutes min. of 10% 20% 30% required for Exemplary Performance Innovation in Design (post consumer + 1/2 pre-consumer) of the total value of materials used in the project.	1 point 1 point 1 point	All ResinDek panels are composed of at least 84% pre-con-sumer recycled content	Increase demand for bldg prod-ucts that incorporate recycled content materials, reducing impact from extraction and processing virgin materials
Materials & Resources MR 5.1, 5.2 & Exemplary Performance - Innovation in Design	Use products manufactured within a 500-mile radius of the project site on a min. of 10% 20% 40% of the total materials value of the project for the Exemplary Performance.	1 point 1 point 1 point	All ResinDek panels are manufactured in Louisville, KY and may contribute points based on proximity of the project	Increase demand for bldg materials that are manufactured within the region, reducing environmental impacts from transportation
Optimize Use of Alternative Materials - MR 2.1-2.5	For Existing Bldgs, maintain a sustainable purchasing program covering paper, office equip, furniture, and bldg materials for use in the bldg that contain at least 10% postconsumer or 20% post industrial (same as pre-consumer materials	1 to 5 points 1 point for each 10% of purch., up to50%	All ResinDek panels are composed of at least 84% pre-consumer recycled contents	Reduce Environmental Impacts of materials acquired for use in operations, maintenance, and upgrades of buildings
Indoor Environmental Air Quality - EQ 4.4	Composite Wood Products shall contain no added ureaformaldehyde resins	1 point	ResinDek is made without formaldehyde containing additives	Reduce the quantity of indoor air contaminates that are odorous, irritating, and/or harmful to the comfort and well- being of installers and occupants
Optimize Use of IAQ CompliantProducts MR3.1 & 3.2	Composite Wood Products shall contain no added ureaformaldehyde resins	2 points 1 point for each 45% of purch., up to 90%	ResinDek is made without formaldehyde containing additives	For Existing Buildings, reduce the indoor air quality (IAQ) impacts of the materials acquired for use in the operation, maintenance, and upgrades of buildings
Const. IAQ Management Plan - IEQ Credit 3	After construction ends, conduct baseline IAQ testing procedure that demonstrates that the concentration levels for certain chemical air contaminants are below specified levels. For Formaldehyde, the max allowable concentration is to be 0.05 ppm.	1 point	ResinDek is is made without formaldehyde containing additives	For Existing Buildings, prevent indoor air quality (IAQ) problems from any construction/renovation projects to help sustain the comfort & well being of const workers/bldg occupants

All credits/points are subject to interpretation/ruling by USGBC review team. The technical information provided on these pages is correct to the best of our knowledge. For further information and updates about the LEED Rating System, please contact the U.S. Green Building Council at www.usgbc.org