Warranty

Cornerstone Specialty Wood Products, LLC® (CSWP) warrants ResinDek® panels listed in its current published warranty coverage documentation to be free from defect, structurally sound, and able to safely carry specified design loads. At its option, CSWP will replace or make a reasonable allowance for repair to any covered ResinDek panel found to be defective for a period of ten (10) years from the date of shipment to the job-site. This warranty is between CSWP and its customer and transfers to the end user for the full warranty term.

1. All panels must be installed with approved fasteners, used and maintained in accordance with ResinDek Installation Instructions.

2. ResinDek panels are intended for interior applications. All ResinDek panels must be properly unloaded, protected and stored in a dry environment prior to their installation.

3. Refer to the table in the warranty for uniform loads, total robot loads and contact pressures. ResinDek Xspan® and Xspan® FR must be supported at intervals approved in advance by CSWP with structural supports capable of withstanding loads imposed. Fastener number, pattern and type must be approved in advance by CSWP. The gauge and type of corrugated metal decking and/or beam spacing for the load on the floor must also be approved by CSWP.